Skip to main content

How to Remotely Access Teltonika Devices with ZeroTier

Remotely access and manage your Teltonika router using ZeroTier.

Updated over 4 months ago

This article is a manual on how to configure Teltonika devices.

Using ZeroTier, a virtual networking service, you can create secure, encrypted connections between devices over the internet—as if they were on the same local network.

✅ Use Cases:

  • Remotely manage your Teltonika router

  • Connect remote devices into one unified virtual network

  • Access devices behind firewalls or NAT without port forwarding


Install Teltonika Package Manager

The Teltonika Package Manager is available on Teltonika Netwrok devices (like RUT routers) and allows you to install or remove optional software packages such as VPN clients like ZeroTier.

  1. Enter the device's web interface address (for example, 192.168.1.198) into your browser's address bar.

  2. Navigate to System > Package Manager.

  3. Type zerotier in the search bar.

  4. Press the Install button to install the package.

  5. Wait for the package to finish installing, then continue to the next step.


Set up ZeroTier

  1. Go to Services > VPN.

  2. Select the ZeroTier tab.

  3. Then, select the ZeroTier General tab below.

  4. Check the box to enable ZeroTier.

  5. In the 'Networks' field, enter: 35c192ce9b93cd75 .

  6. Press the Save button to apply your settings.

  7. Once saved, an ID will appear on-screen.

    Copy this ID and send it to Ventrata to complete the connection.

Did this answer your question?