Skip to main content

How to Set Up the Zebra TC201 with Zebra DNA Cloud

Connect your Zebra TC201 handheld to your Wi-Fi and enrol it in Ventrata’s device management, so Ventrata can configure and update it remotely.

Ventrata manages Zebra TC201 handheld devices through Zebra DNA Cloud, Zebra’s device management platform. Once a device is enrolled, Ventrata can apply settings and updates remotely, without anyone having to handle the device.

Setting up a device takes a few minutes. You only need the device, your Wi-Fi details and the setup barcodes sent to you.

📒 NOTE

Zebra DNA Cloud manages Zebra devices only. Other hardware, such as Elo or PAX devices, is managed separately and is not affected by this setup.


Prerequisites:

Make sure you have,

  • the Zebra devices you want to set up charged or connected to a charger

  • details of the Wi-Fi network the devices will use

  • a computer screen or a printer, to display or print the setup barcodes

📗 TIP

If your network uses a firewall or content filter, ask your IT team to allow HTTPS traffic (port 443) to:

  • *.zebra.com

  • ts.dnac.zebra.com

  • device-https.savannacore.zebra.com

  • content.swengagement.zebra.com

  • data.swengagement.zebra.com

  • connectivitycheck.gstatic.com

  • *.googleapis.com

  • *.firebaseio.com

  • *.cloudfunctions.net

  • *.firebaseapp.com

  • *.linodeobjects.com

  • api.linode.com

The Ventrata domains your devices also need are listed in Network Configuration for Terminal Device Connectivity.

Step 1: Send Your Wi-Fi Details to Ventrata

Send Ventrata Support the details of the network the devices will use. Ventrata uses them to create your setup barcodes.

Find your network’s security mode type in the columns below and send Ventrata what it needs.

📗 TIP

If you are not sure which security mode type your network uses, ask your IT team or network provider. If your Enterprise network uses certificates instead of a password, let Ventrata know so they can advise.

What to send

Open

Personal

Enterprise

Wi-Fi name (SSID)*

Y

Y

Y

Security mode type

N/A

WPA2 or

WPA/WPA2 or

WPA3 (SAE)

WPA/WPA2 or

WPA3

Identity (username)

N/A

N/A

Y

Password

N/A

Y

Y

Proxy (only if used)

Host name

Port

Bypass list

Host name

Port

Bypass list

Host name

Port

Bypass list

*Send the Wi-Fi name exactly as it appears on your devices, including capital letters and spaces.

❌ WARNING

Your Wi-Fi password is sensitive data. Share it only through the secure method agreed with Ventrata Support, never in a public channel or a shared document.


Step 2: Receive Setup Barcodes

Ventrata sends you a PDF with the setup barcodes for your devices.

  • Keep the PDF private. The barcodes contain your Wi-Fi details.

  • You can reuse the same PDF to set up more devices on the same network later.

  • If your Wi-Fi name, password or security mode type changes, request new barcodes from Ventrata.


Step 3: Factory Reset the Device (only if it is not new)

Skip this step if your device is brand new. If the device has been used before, it must be reset before setup.

❌ WARNING

A factory reset erases all data on the device. Make sure nothing on it needs to be kept before you continue.

  1. On your Zebra device, swipe down from the top of the screen and go to Settings > System.

    Settings

  2. Select Reset options.

    Reset Options

  3. Choose Erase all data (enterprise reset).

    Erase All Data (Enterprise Reset)

  4. Press the Erase all data button.

    Erase All Data


Step 4: Scan the Setup Barcodes

Use the StageNow app to set up (stage) the device.

  1. When the device restarts (or starts up for the first time if the device is new), follow the welcome screen until you reach the home screen.

  2. (Optional) Set a screen lock PIN for the device.

  3. Open the StageNow app. You can find it in the app list by swiping up from the home screen.

    StageNow

  4. Point the device at the barcode on a screen or a printout.

  5. Press the scan button on either side of the device to scan the barcode. If there are multiple barcodes, scan them in order from top to bottom.

    Barcode Staging

    📗 TIP

    If the barcode does not scan from a computer screen, increase the screen brightness, zoom in on the barcode, or print the PDF.

  6. Leave the device undisturbed until staging is complete.

    Enrolment

    The device first connects to your Wi-Fi, then goes online to finish the setup.

    Enrolment Online


Step 5: Check That the Device Is Enrolled

After staging, the device downloads the Zebra DNA app and enrols itself automatically.

When enrolment is successful, a Zebra DNA Service Running icon appears in the notification bar at the top of the screen.

Zebra DNA Service Running


Step 6: Share Device Info with Ventrata

Let Ventrata Support know which devices are set up, including their serial numbers. Locate a device's serial number under the battery or in Settings > About phone.


Step 7: Shorten the Screen Timeout (recommended)

Enrolment sets the screen to stay on for 30 minutes. Set a shorter time to save battery life.

  1. On your Zebra device, swipe down from the top of the screen and go to Settings > System.

    Settings

  2. Select Display.

    Display

  3. Choose Screen timeout.

    Screen Timeout

  4. Choose a shorter time, for example 2 or 5 minutes.

    Screen Timeout Options


What Happens Next

Ventrata confirms that each device appears in Zebra DNA Cloud and activates its licence. You will be notified when your devices are ready to use.


Troubleshooting

The barcode does not scan.

Make sure the StageNow app is open. Increase the screen brightness or print the barcode, then try again.

Staging stops or shows an error.

Check that the Wi-Fi details you sent to Ventrata are correct and that your network allows the domains listed under Prerequisites. Then contact Ventrata Support.

No Zebra DNA Service Running icon.

Check that the device is connected to Wi-Fi. If the icon still does not appear after a few minutes, contact Ventrata Support with the device’s serial number and a photo of the screen.


Related Content

Did this answer your question?